LTCC技术资料
LTCC技术资料
iLTCC.com

LTCC设计规则(LTCC Design Rules)二——值

发布时间:2014-12-23 10:44:44   阅读:2754
LTCC设计规则(LTCC Design Rules)二——值

 

Table Of Main Values    
     
  Standard Possible
Edge To Feature in um 500 250
     
Line Width in um 200 100
Line Width in um (Fine Line Process) 50 50
Line Spacing in um 200 100
Line Spacing in um (Fine Line Process) 50 50
Line Pitch in um 400 200
Line To Cavity Wall Spacing in um 400 /
     
Via Diameter in um 250 100
Via Coverpad / Catchpad 2x via diameter via diam. 25um
Via Spacing in um 200 175
Via Pitch in um 400 300
Via Stagger 1.5x via diameter /
Via To Cavity Wall Spacing in um 550 300
Via Geometry Round + Rectangular Round + Rectangular
Via Types blind, buried, stacked blind, buried, stacked
Thermal Via Coverage in % 15 30
     
Min. Resistor Dimensions in mm 1 x 1 0.5 x 0.5
Min. Resistor Overlap in um 300 200
Min. Width After Trimming in um 300 200
Tolerance After Trimming (Surface / Buried) +/- 2% / +/- 25% +/- 1% / x
Ground / Power Plane Coverage 50% 75%
Opening For Feed Through (length in um) 750 350
     
Max. Number Of Layers Depends on Thickness (10 - 50) Depends on Thickness (10 - 50)
Min. Number Of Layers Depends on Thickness (2 - 4) Depends on Thickness (2 - 4)
Circuit Shapes Rectangular, special shapes possible Rectangular, special shapes possible
Size Tolerance +/- 0.5% +/- 0.25%
     
Cavity's Shape Rectangular, circular, special shapes possible Rectangular, circular, special shapes possible
Min. Floor Thickness in um 450 200
Max. Cavity Depth in um 1500 2500
Min Cavity Size in um 1000 500
Max. Cavity Size in um Depends on layout Depends on layout
Cavity Wall To Part Edge Spacing in um >1000 /
Bond Pad / Conductor Discoverage in um 750 /
Cavity Wall To Conductor Spacing in um 400 /
Cavity Wall To Via Spacing in um 2.5x via size /
Cavity Wall To Pad Spacing in um 250 /
Spacing Between Two Cavities in um 1270 /
     
Window's Shape Rectangular, circular, special shapes possible Rectangular, circular, special shapes possible
Window Depth in um < 2000 > 2000
Min. Window Size (length in um) 1000 500
Max. Window Size (length in um) Depends on layout Depends on layout
Pitch Of BGA / LGA I/Os in mm 2.54 0.635
Wire Bonding Pitch in um 500 150
Solder Pad Pitch in um 400 250
Flip Chip Bonding Pitch in um 400 250

 

A : Bond Pad / Conductor Discoverage
B : Cavity Wall To Bond Pad Spacing
C : Cavity Wall To Conductor spacing
D : Cavity Wall To Via Spacing
E : Cavity Wall To Die Pad / Bottom Conductor Spacing

上一篇:LTCC设计规则(LTCC Design Rules)一——术语

下一篇:LTCC设计规则(LTCC Design Rules)三——Cavities / Windows

最新发布
相关文章
版权所有 © 2012 - 2015 深圳市华源茂业科技有限公司 粤ICP备14091801号-2